Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 156 -
7.2.26 AT+QIFGCNT Configure a context as foreground context
AT+QIFGCNT Configure a context as foreground context
Test Command
AT+QIFGCNT=
?
Response
+QIFGCNT: (list of supported <id>s)
OK
Parameter
See Write Command
Read Command
AT+QIFGCNT?
Response
+QIFGCNT: <id>,<channel>
OK
Parameter
See Write Command
Write Command
AT+QIFGCNT=
<id>
Response
OK
ERROR
Parameter
<id> A numeric to indicate which context will be set as foreground
context. The range is 0-1
<channel> A numeric to indicate which channel is controlling the
context <id>.
0 AT_COMMAND_1
1 AT_COMMAND_2
2 AT_COMMMAD_3
3 AT_COMMAND_4
255 the context is not controlled by any channel
Note:
When CMUX is opened, if the state of the context defined by id is not
IP_INITIAL and the context is controlled by the other channel, it will return
ERROR
Reference Note
7.2.27 AT+QISACK Query the length of sent data and the length of acknowledged data
AT+QISACK Query the length of sent data and the length of acknowledged data
Test Command
AT+QISACK=?
Response
OK
Parameter
See Write Command
Execution
Command
AT+QISACK
Response
+QISACK: <sent>, <acked>, <nAcked>
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English