Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 76 -
Reference
GSM 07.07 [13]
Note
3.2.48 AT+CFUN Set Phone Functionality.
AT+CFUN Set Phone Functionality.
Response
+CFUN: (list of supported <fun>s), (list of supported <rst>s)
OK
+CME ERROR: <err>
Test Command
AT+CFUN=?
Parameters
See Write Command
Response
+CFUN: <fun>
OK
+CME ERROR: <err>
Read Command
AT+CFUN?
Parameters
See Write Command
Response
OK
+CME ERROR: <err>
Write Command
AT+CFUN=<fun
>，[<rst>]
Parameters
<fun> 0 minimum functionality
1 full functionality (Default)
4 disable phone both transmit and receive RF circuits
<rst> 0 Set the ME to <fun> power level immediately. This
is the default when <rst> is not given.
1 Set the ME to <fun> power level after the ME been
reset.
Reference
GSM 07.07 [13]
Note
3.2.49 AT+CCLK Clock
AT+CCLK Clock
Response
OK
Test Command
AT+CCLK=?
Parameters
Read Command
AT+CCLK?
Response
+CCLK: <time>
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English