M10 AT Commands Set
M10_ATC_V1.01 - 52 -
(applicable only for <mode>=0)
"FD" SIM fixed dialing memory: If the mobile is locked to
“FD”, only the phone numbers stored to the “FD”
memory can be dialed
"PF" Lock Phone to the very first SIM card
"PN" Network Personalization (refer GSM 02.22[33])
"PU" network subset Personalization (refer GSM 02.22[33])
"PP" service Provider Personalization (refer GSM
02.22[33])
"PC" Corporate Personalization (refer GSM 02.22[33])
<mode> 0 unlock
1 lock
2 query status
<passwd> password
<class> 1 voice
2 data
4 fax
7 all telephony except sms (Default)
8 short message service
16 data circuit sync
32 data circuit async
<status> 0 off
1 on
Reference
GSM 07.07 [14]
Note
3.2.20 AT+CLIP Calling Line Identification Presentation
AT+CLIP Calling Line Identification Presentation
Response
+CLIP: <n>, <m>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Read Command
AT+CLIP?
Parameters
see Write Command
Response
+CLIP: (list of supported <n>s)
OK
Test Command
AT+CLIP=?
Parameters
To Next Page
Loading...
