Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 128 -
<rxl> receive level.
<rxq> receive quality.
<mcc> mobile country code.
<mnc> mobile network code.
<bsic> base station identity code.
<cellid> cell id.
<rla> receive level access minimum.
<txp> transmit power maximum CCCH.
Reference Note
6.2.21 AT+QSCLASS0 Store Class 0 SMS To SIM When Received Class 0 SMS
AT+ QSCLASS0 Store Class 0 SMS To SIM When Received Class 0 SMS
Response
+QSCLASS0: <mode>
OK
Read Command
AT+QSCLASS0
?
Parameter
See Write Command.
Response
+QSCLASS0: (0, 1)
OK
Test Command
AT+QSCLASS0
=?
Parameter
See Write Command.
Response
OK
ERROR
Write Command
AT+QSCLASS0
=[<mode>]
Parameter
<mode>
0 – disable to store Class 0 SMS to SIM when received Class 0 SMS
1 – Enable to store Class 0 SMS to SIM when received Class 0 SMS
Reference Note
6.2.22 AT+QCCID Show ICCID
AT+QCCID Show ICCID
Test Command
AT+QCCID =?
Response
OK
Execution
Command
AT+ QCCID
Response
ccid data [ex. 898600810906F8048812]
OK
Quectel