M10 AT Commands Set
M10_ATC_V1.01 - 83 -
Reference
GSM 07.07 [13]
Note
Support for this Command will be hardware dependant and only be used
when battery is set to vibrator
3.2.58 AT+CUSD Unstructured Supplementary Service Data
AT+ CUSD Unstructured Supplementary Service Data
Response
+CUSD: (<n>s)
OK
Test Command
AT+CUSD=?
Parameter
see Write Command
Response
+CUSD: <n>
OK
Read Command
AT+CUSD?
Parameter
see Write Command
Response
OK
ERROR
Write Command
AT+CUSD=[<n>
[,<str>[,<dcs>]]
Parameters
<n> a numeric parameter which indicates control of the unstructured
supplementary service data
0 disable the result code presentation in the TA
1 enable the result code presentation in the TA
2 cancel session (not applicable to read Command response)
<str> string type USSD-string
<dcs> Cell Broadcast Data Coding Scheme in integer format (default 0)
Reference
GSM 03.38 [25]
Note
3.2.59 AT+CSSN Supplementary Services Notification
AT+CSSN Supplementary Services Notification
Response
+CSSN: (list of supported <n>s), (list of supported <m>s)
OK
Test Command
AT+CSSN=?
Parameters
see Write Command
Read Command
AT+CSSN?
Response
+CSSN: <n>,<m>