Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 131 -
6.2.26 AT+QLTONE Generate Local Specifical Tone
AT+SIMTONE Generate Specifically Tone
Response
+QLTONE: (0-1), (0-50000), (0-1000), (0-1000), (0-15300000)
OK
Test Command
AT+QLTONE
=?
Parameters
See Write Command.
Response
OK
ERROR
Write Command
AT+QLTONE
=<mode>,<
frequency >,<
periodOn >,<
periodOff >,<
duration >
Parameters
<mode> 0 – Stop playing tone
1 – Start playing tone
<frequency > the frequency of tone to be generated
<periodon> the period of generating tone
<periodoff> the period of stopping tone
<duration> duration of tones in milliseconds
Reference Note
6.2.27 AT+QCLIP Connected Line Identification Presentation Without Alpha String
AT+QCLIP Connected Line Identification Presentation Without Alpha String
Response
+QCLIP: <mode>
OK
Read Command
AT+QCLIP?
Parameter
Response
OK
ERROR
Write Command
AT+QCLIP=[<m
ode>]
Parameter
<mode>
0 – disable to present alpha string
1 – enable to present alpha string
Reference Note
6.2.28 AT+QGID Get SIM Card Group Identifier
AT+QGID Get SIM Card Group Identifier
Execution
Command
AT+ QGID
Response
+QGID: <gid1> <gid2>
Quectel