Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 37 -
AT+CRLP SELECT RADIO LINK PROTOCOL PARAMETER
AT+CRSM RESTRICTED SIM ACCESS
AT+CSQ SIGNAL QUALITY REPORT
AT+FCLASS FAX: SELECT, READ OR TEST SERVICE CLASS
AT+FMI FAX: REPORT MANUFACTURED ID
AT+FMM FAX: REPORT MODEL ID
AT+FMR FAX: REPORT REVISION ID
AT+VTD TONE DURATION
AT+VTS DTMF AND TONE GENERATION
AT+CMUX MULTIPLEXER CONTROL
AT+CNUM SUBSCRIBER NUMBER
AT+CPOL PREFERRED OPERATOR LIST
AT+COPN READ OPERATOR NAMES
AT+CFUN SET PHONE FUNCTIONALITY
AT+CCLK CLOCK
AT+CSIM GENERIC SIM ACCESS
AT+CALM ALERT SOUND MODE
AT+CRSL RINGER SOUND LEVEL
AT+CLV L LOUD SPEAKER VOLUME LEVEL
AT+CMUT MUTE CONTROL
AT+CPUC PRICE PER UNIT CURRENCY TABLE
AT+CCWE CALL METER MAXIMUM EVENT
AT+CBC
BATTERY CHARGE
AT+CUSD UNSTRUCTURED SUPPLEMENTARY SERVICE DATA
AT+CSSN SUPPLEMENTARY SERVICES NOTIFICATION
AT+CSNS SINGLE NUMBERING SCHEME
AT+CMOD CONFIGRUE ALTERNATING MODE CALLS
3.2 Detailed Descriptions of AT Command According to GSM07.07
3.2.1 AT+CACM Accumulated Call Meter (ACM) Reset Or Query
AT+CACM Accumulated Call Meter(ACM) Reset Or Query
Test Command
AT+CACM=?
Response
OK
Parameter
Read Command
AT+CACM?
Response
TA returns the current value of ACM.
+CACM: <acm>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<acm> string type; three bytes of the current ACM value in
hexa-decimal format (e.g. "00001E" indicates
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English