Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 146 -
7 no memory
8 unknown error
<state> refer to AT+QIOPEN
Reference Note
7.2.12 AT+QIDNSIP Connect With IP Address Or Domain Name Server
AT+QIDNSIP Connect With IP Address Or Domain Name Server
Test Command
AT+QIDNSIP=?
Response
+QIDNSIP: (list of supported <mode>s)
OK
Parameter
See Write Command
Read Command
AT+QIDNSIP?
Response
+QIDNSIP: <mode>
OK
Parameter
See Write Command
Write Command
AT+QIDNSIP=<
mode>
Response
OK
ERROR
Parameter
<mode> a numeric parameter which indicates connecting with IP
address server or domain name server
0 remote server is an IP address
1 remote server is a domain name
Reference Note
7.2.13 AT+QIHEAD Add An IP Head When Receiving Data
AT+QIHEAD Add An IP Head When Receiving Data
Test Command
AT+QIHEAD=?
Response
+QIHEAD: (list of supported <mode>s)
OK
Parameter
See Write Command
Read Command
AT+QIHEAD?
Response
+QIHEAD: <mode>
OK
Quectel