Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 124 -
6.2.15 AT+QCGTIND CS Voice/Data/Fax Call Or GPRS PDP Context Termination
Indication
AT+QCGTIND CS Voice/Data/Fax Call Or GPRS PDP Context Termination Indication
Response
+QCGTIND: (list of supported <n>s)
OK
Test Command
AT+QCGTIND
=?
Parameter
See Write Command
Response
+QCGTIND: <n>
OK
Read Command
AT+QCGTIND?
Parameter
See Write Command
Response
OK
ERROR
Parameter
<n> a numeric parameter which indicates whether to enable an
unsolicited event code indicating whether a CS voice call, CS
data, fax call or GPRS session has been terminated.
0 disable
1 enable
Write Command
AT+QCGTIND
=<n>
Unsolicited result code
When enabled, an unsolicited result code is returned after the connection
has been terminated
+QCGTIND: < type >
Parameter
< type > connection type
0 CSV connection
1 CSD connection
2 PPP connection
Reference Note
6.2.16 AT+QSPN Get Service Provider Name From SIM
AT+QSPN Get Service Provider Name From SIM
Read Command
AT+QSPN?
Response
+QSPN: <spn>,<display mode>
OK
Quectel