Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 120 -
6.2.8 AT+QRSTCB Reset Cell Broadcast
AT+QRSTCB Reset Cell Broadcast
Response
OK
Execution
Command
AT+QRSTCB
Parameter
Reference Note
Reset the CB module
6.2.9 AT+QINDRI Indicate RI When Using URC
AT+QINDRI Indicate RI When Using URC
Response
+QINDRI: <status>
OK
Read Command
AT+ QINDRI?
Parameter
See Write Command
Response
OK
ERROR
Write Command
AT+QINDRI=[<
status>]
Parameter
<status>
0 on
1 off
Reference Note
6.2.10 AT+QLOCTS Get Local Timestamp
AT+QLOCTS Get Local Timestamp
Response
+QLOCTS: the format of <timestamp>
OK
Test Command
AT+QLOCTS=?
Parameter
See Execution Command
Response
+QLOCTS: <timestamp>
Execution
Command
AT+QLOCTS
Parameter
<timestamp> a string parameter which indicates the local timestamp.
The format of timestamp is "yy/MM/dd,hh:mm:ss+/-zz"
Quectel