Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 74 -
None Multiplexer Control 0
1 07.07 and 07.05 1
2 07.07 and 07.05 2
3 07.07 and 07.05 3
4 07.07 and 07.05 4
3.2.45 AT+CNUM Subscriber Number
AT+CNUM Subscriber Number
Test Command
AT+CNUM=?
Response
OK
Response
+CNUM:
[<alpha1>],<number1>,<type1>[,<speed>,<service>[,<itc>]]
[<CR><LF>+CNUM: [<alpha2>],<number2>,<type2>[,<speed>,<ser
vice> [,<itc>]]
[...]]
OK
+CME ERROR: <err>
Execution
Command
AT+CNUM
Parameters
<alphax> optional alphanumeric string associated with <numberx>;
used
character set should be the one selected with Command
Select TE Character Set +CSCS
<numberx> string type phone number of format specified by <typex>
<typex> type of address octet in integer format (refer GSM 04.08 [8]
subclause 10.5.4.7)
<speed> as defined by the +CBST Command
<service> (service related to the phone number: )
0 asynchronous modem
1 synchronous modem
2 PAD Access (asynchronous)
3 Packet Access (synchronous)
4 Voice
5 Fax
<itc> (information transfer capability: )
0 3.1 kHz
1 UDI
Reference
GSM 07.07 [13]
Note
3.2.46 AT+CPOL Preferred Operator List
AT+CPOL Preferred Operator List
Test Command Response
Quectel