Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 130 -
OK
Parameter
See Write Command.
Response
OK
ERROR
Write Command
AT+QSIMDET=
<mode>
Parameter
<mode>
0 – switch off detecting SIM card
1 – switch on detecting SIM card
Reference Note
6.2.25 AT+QMGDA Delete All SMS
AT+QMGDA Delete All SMS
Response
+QMGDA: (listed of supported <type>s)
OK
+CMS ERROR: <err>
Test Command
AT+QMGDA=?
Parameter
See Write Command
Response
OK
ERROR
+CMS ERROR: <err>
Write Command
AT+QMGDA=<t
ype>
Parameter
1) If text mode:
“DEL READ” delete all read messages
“DEL UNREAD” delete all unread messages
“DEL SENT” delete all sent SMS
“DEL UNSENT” delete all unsent SMS
“DEL INBOX” delete all received SMS
“DEL ALL” delete all SMS
3) if PDU mode :
1 delete all read messages
2 delete all unread messages
3 delete all sent SMS
4 delete all unsent SMS
5 delete all received SMS
6 delete all SMS
Reference Note
Quectel