Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 103 -
<dcss> string type; all different possible combinations of CBM data
coding schemes (refer <dcs>) (default is empty string);
e.g. "0-3,5".
Reference
GSM 07.05
Note
4.2.15 AT+CSDH Show SMS Text Mode Parameters
AT+CSDH Show SMS Text Mode Parameters
Response
+CSDH: <show>
OK
Read Command
AT+CSDH?
Parameters
see Write Command
Response
+CSDH: (list of supported <show>s)
OK
Test Command
AT+CSDH=?
Parameter
see Write Command
Response
TA determines whether detailed header information is shown in text mode
result codes.
OK
Write Command
AT+CSDH=[<sh
ow>]
Parameter
<show>
0 do not show header values defined in commands
+CSCA and +CSMP (<sca>, <tosca>, <fo>, <vp>,
<pid> and <dcs>) nor <length>, <toda> or <tooa> in
+CMT, +CMGL, +CMGR result codes for
SMS-DELIVERs and SMS-SUBMITs in text mode
1 show the values in result codes
Reference
GSM 07.05
Note
4.2.16 AT+CSMP Set SMS Text Mode Parameters
AT+CSMP Set SMS Text Mode Parameters
Response
+CSMP: <fo>,<vp>,<pid>,<dcs>
OK
Read Command
AT+CSMP?
Parameters
see Write Command
Test Command Response
Quectel