Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 129 -
Parameter
Reference Note
6.2.23 AT+QTEMP Set Critical Temperature Operating Mode Or Query Temperature
AT+CMTE Set Critical Temperature Operating Mode Or Query Temperature
Response
+QTEMP: <mode><Temperature>
OK
Read Command
AT+QTEMP?
Parameters
See Write Command.
Response
OK
ERROR
Write Command
AT+QTEMP=
[<mode>]
Parameters
<mode>
0 disable power off
1 enable power off
< Temperature> range of -40 to 90
Reference
Note
z When temperature is extreme high or low, product will power off.
z URCs indicating the alert level "1" or "-1" are intended to enable the
user to take appropriate precautions, such as protect the module from
exposure to extreme conditions, or save or back up data etc.
Presentation of "1" or "-1" URCs is always enabled.
z Level "2" or "-2" URCs are followed by immediate shutdown. The
presentation of these URCs are always enabled
6.2.24 AT+QSIMDET Switch On Or Off Detecting SIM Card
AT+ QSIMDET Switch On Or Off Detecting SIM Card
Response
+QSIMDET: <mode>
OK
Read Command
AT+QSIMDET?
Parameter
Test Command
AT+QSIMDET
=?
Response
+QSIMDET: (0-1)
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English