M10 AT Commands Set
M10_ATC_V1.01 - 121 -
yy: year
MM: month
dd: day
hh: hour
mm: minute
ss: second
zz: time zone
Reference
Note
Support for this Command will be network dependant
6.2.11 AT+QEXTHS External Headset Jack Control
AT+ QEXTHS External Headset Jack Control
Response
+QEXTHS: (<mode>s)
OK
Test Command
AT+QEXTHS=?
Parameter
See Write Command
Response
+QEXTHS: <mode>,<headset attach>
OK
Read Command
AT+QEXTHS?
Parameters
See Write Command
Response
OK
ERROR
If error is related to ME functionality:
+CMS ERROR: <err>
Unsolicited result code
+QEXTHS: <mode>,<headset attach>
Write Command
AT+QEXTHS=<
mode>
Parameters
<mode> a numeric parameter which indicates whether an
unsolicited event code (indicating whether the
headset has been attached/detached) should be sent
to the terminal.
0 not send unsolicited event code
1 send unsolicited event code
<headset attach> a numeric parameter which indicates whether a
headset has been attached or not
0 not attached
1 attached
Reference Note
To Next Page
Loading...
