Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 125 -
+CME ERROR: <err>
Parameters
<spn> string type; service provider name on SIM
<display mode> 0 – don’t display PLMN. Already registered on
PLMN
1 – display PLMN
Reference Note
CME errors possible if SIM not inserted or PIN not entered.
6.2.17 AT+QBAND Get And Set Mobile Operation Band
AT+QBAND Get ASd Set Mobile Operation Band
Response
+QBAND: <op_band>
OK
Read Command
AT+QBAND?
Parameter
See Write Command
Response
+QBAND: (list of supported <op_band>s)
OK
Test Command
AT+QBAND=?
Parameter
See Write Command
Response
OK
If error is related to ME functionality:
+CMS ERROR: <err>
Write Command
AT+QBAND=<o
p_band>
Parameter
<op_band>
PGSM_MODE
DCS_MODE
PCS_MODE
EGSM_DCS_MODE
GSM850_PCS_MODE
Reference Note
Radio settings following updates are stored in non-volatile memory.
6.2.18 AT+QAUDCH Swap The Audio Channels
AT+QAUDCH Swap The Audio Channels
Response
+QAUDCH: <n>
OK
Read Command
AT+QAUDCH?
Parameter
See Write Command.
Quectel