Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 86 -
4 AT Commands According to GSM07.05
The GSM 07.05 commands are for performing SMS and CBS related operations. M10
supports both Text and PDU modes.
4.1 Overview of AT Commands According to GSM07.05
Command Description
AT+CMGD
DELETE SMS MESSAGE
AT+CMGF
SELECT SMS MESSAGE FORMAT
AT+CMGL
LIST SMS MESSAGES FROM PREFERRED STORE
AT+CMGR
READ SMS MESSAGE
AT+CMGS
SEND SMS MESSAGE
AT+CMGW
WRITE SMS MESSAGE TO MEMORY
AT+CMSS
SEND SMS MESSAGE FROM STORAGE
AT+CMGC
SEND SMS COMMAND
AT+CNMI
NEW SMS MESSAGE INDICATIONS
AT+CPMS
PREFERRED SMS MESSAGE STORAGE
AT+CRES
RESTORE SMS SETTINGS
AT+CSAS SAVE SMS SETTINGS
AT+CSCA SMS SERVICE CENTER ADDRESS
AT+CSCB SELECT CELL BROADCAST SMS MESSAGES
AT+CSDH SHOW SMS TEXT MODE PARAMETERS
AT+CSMP SET SMS TEXT MODE PARAMETERS
AT+CSMS SELECT MESSAGE SERVICE
4.2 Detailed Descriptions of AT Commands According to GSM07.05
4.2.1 AT+CMGD Delete SMS Message
AT+CMGD Delete SMS Message
Read Command
AT+CMGD=?
Response
+CMGD：(Range of SMS on SIM card can be deleted)
OK
Response
TA deletes message from preferred message storage <mem1> location
<index>.
OK
ERROR
If error is related to ME functionality:
+CMS ERROR:<err>
Write Command
AT+CMGD=<in
dex>
Parameter
<index> integer type; value in the range of location numbers supported by
the associated memory
Reference
GSM 07.05
Note
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English