Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 40 -
Test Command
AT+CBST=?
Response
+CBST: (list of supported <speed>s) ,(list of supported <name>s) ,(list
of supported <ce>s)
OK
Parameter
see Write Command
Read Command
AT+CBST?
Response
+CBST: <speed>,<name>,<ce>
OK
Parameter
see Write Command
Write Command
AT+CBST=[<spe
ed>]
[,<name>[,<ce>]]
]
Response
TA selects the bearer service <name> with data rate <speed>, and the
connection element <ce> to be used when data calls are originated.
OK
Parameters
<speed> 0 autobauding
4 2400 bps(V.22bis)
5 2400 bps(V.26ter)
6 4800 bps(V.32)
7 9600 bps(V.32)
12 9600 bps(V.34)
14 14400 bps(V.34)
68 2400 bps(V.110 or X.31 flag stuffing)
70 4800 bps(V.110 or X.31 flag stuffing)
71 9600 bps(V.110 or X.31 flag stuffing)
75 14400 bps(V.110 or X.31 flag stuffing)
<name>
0 asynchronous modem
<ce> 0 transparent
1 non-transparent
2 both, transparent preferred
3 both, non-transparent preferred
Reference
GSM 07.07 [14]
Note
GSM 02.02[1]: lists the allowed combinations of the sub parameters
3.2.5 AT+CCFC Call Forwarding Number And Conditions Control
AT+CCFC Call Forwarding Number And Conditions Control
Test Command
AT+CCFC=?
Response
+CCFC: (list of supported <reads>)
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English