Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 22 -
ATS0? <n>
OK
Response
This parameter setting determines the number of rings before auto-answer.
OK
Write Command
ATS0=<n>
Parameter
<n>
0 automatic answering is disable
1-255 enable automatic answering on the ring number
specified
Reference
V.25ter
Note
z If <n> is set too high, the calling party may hang up before the call can
be answered automatically.
2.2.16 ATS3 Set Command Line Termination Character
ATS3 Set Command Line Termination Character
Read Command
ATS3?
Response
<n>
OK
Response
This parameter setting determines the character recognized by TA to
terminate an incoming Command line. The TA also returns this character in
output.
OK
Write Command
ATS3=<n>
Parameter
<n> 0-
13-127 Command line termination character
Reference
V.25ter
Note
z Default 13 = CR.
2.2.17 ATS4 Set Response Formatting Character
ATS4 Set Response Formatting Character
Read Command
ATS4?
Response
<n>
OK
Response
This parameter setting determines the character generated by the TA for
result code and information text.
OK
Write Command
ATS4=<n>
Parameter
<n> 0-
10-127 response formatting character
Reference Note
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English