Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 43 -
3.2.6 AT+CCUG Closed User Group Control
AT+CCUG Closed User Group Control
Response
+CCUG: <n>,<index>,<info>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Read Command
AT+CCUG?
Parameter
see Write Command
Test Command
AT+CCUG=?
Response
OK
TA sets the Closed User Group supplementary service parameters as a
default adjustment for all following calls.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+CCUG=[<n>
]
[,<index>[,<info
>]]]
Parameters
<n>
0 disable CUG
1 enable CUG
<index>
0...9 CUG index
10 no index (preferred CUG taken from subscriber data)
<info>
0 no information
1 suppress OA (Outgoing Access)
2 suppress preferential CUG
3 suppress OA and preferential CUG
Reference Note
3.2.7 AT+CCWA Call Waiting Control
AT+CCWA Call Waiting Control
Read Command
AT+CCWA?
Response
+CCWA: <n>
OK
Test Command
AT+CCWA=?
Response
+CCWA: (list of supported <n>s)
OK
Write Command
AT+CCWA=[<n
>]
[,<mode>[,<class
>]]]
Response
TA controls the Call Waiting supplementary service. Activation,
deactivation and status query are supported.
If <mode><>2 and Command successful
OK
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English