M10 AT Commands Set
M10_ATC_V1.01 - 42 -
<type> type of address in integer format; default 145 when dialing string
includes international access code character "+", otherwise 129
<subaddr> string type subaddress of format specified by <satype>
<satype> type of sub-address in integer
<class> 1 voice
2 data
4 fax
7 all telephony except sms
8 short message service
16 data circuit sync
32 data circuit async
<time>
time to wait before call is forwarded,rounded to a multiple of 5 sec.
1...20..30 (only for <reas>=no reply)
<status>
0 not active
1 active
Reference
GSM07.07
Note
To Next Page
Loading...
