Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 152 -
Gprs Config Password:<gpwd>
Gprs Config inactivityTimeout:<timeout>
CSD Dial Number:<cnum>
CSD Config UserId:<cusr>
CSD Config Password:<cpwd>
CSD Config rate:<crate>
App Tcpip Mode:<mode>
In Transparent Transfer Mode
Number of Retry:<nmRetry>
Wait Time:<waitTm>
Send Size:<sendSz>
esc:<esc>
OK
Parameters
<mode> see AT+QIDNSIP
<sendprompt> see AT+QIPROMPT
<iphead> see AT+QIHEAD
<srip> see AT+QISHOWRA
<csgp> see AT+QICSGP
<apn> see AT+QICSGP
<gusr> see AT+QICSGP
<gpwd> see AT+QICSGP
<timeout> see AT+QICSGP
<cnum> see AT+QICSGP
<cusr> see AT+QICSGP
<cpwd> see AT+QICSGP
<crate> see AT+QICSGP
<nmRetry> see AT+QITCFG
<waitTm> see AT+QITCFG
<sendSz> see AT+QITCFG
<esc> see AT+QITCFG
Response
TA saves TCPIP Application Context which consist of following AT
Command parameters, and when system is rebooted, the parameters will
be loaded automatically:
AT+QIDNSIP, AT+QIPROMPT, AT+QIHEAD,
AT+QISHOWRA, AT+QICSGP
OK
Execution
Command
AT+QISCON
Parameter
Quectel