Installation
QL-300 User Guide 16
• Do not install the equipment in a location that is accessible by small children.
• Do not install the equipment in a location that is unstable (on a wobbly table or inclined
place).
• Do not install the equipment in direct sunlight or in a very dusty or humid location.
• Do not install the equipment in an environment subject to salt air, NOx, SOx or corrosive
gases.
• Do not install the equipment in a location that is subject to excessive vibration.
• Do not install the equipment in a location where the machine's vents are blocked. Check
the positions of the vents in the following illustrations.
To Next Page
Loading...
