Installation
QL-300 User Guide 32
Installing the Unwinder on the Printer
After unpacking the unwinder, install it to the printer.
Caution: Be careful that you do not drop the unwinder.
Caution: Be careful that you do not pinch your hands or fingers between the unwinder and
the printer.
Caution: Securely tighten the three screws. If they are loose, there is a risk that the
unwinder may fall off or the print quality may be degraded.
1 Check whether the adjuster on the unwinder is raised up. If the adjuster is not raised, before
you mount it on the printer, rotate it to the up position.
To Next Page
Loading...
