PC Connection
QL-300 User Guide 45
Connecting a USB Cable
Use this connector when connecting the printer to a computer with a USB cable.
Note: Do not connect the USB cable until prompted during the installation process. See
“Installing the Printer Driver (USB)” on page 58.
1 Prepare a USB cable.
Note: The printer does not come with a USB cable. You need to prepare a USB 2.0 cable
that is no longer than two meters.
Note: If you are planning to connect using the USB 2.0 Hi-Speed mode, you need to
prepare a Hi-Speed USB 2.0 cable.
Note: USB 3.0 is not supported.
2 Taking care to orient the connector correctly, connect the square end of the USB cable to
the printer (1).
To Next Page
Loading...
