Printing
QL-300 User Guide 91
• Die-cut label paper (with black marks)
1.2 to 4.0 mm (0.0472 to 0.1575 inches) Length of leading margin when paper is loaded
Loading Media
Load the paper onto the Unwinder. For paper sizes and types that can be loaded on the
Unwinder, see “Paper Types, Size, and Thickness” on page 79.
Note: When setting roll paper, be careful not to drop it. As roll paper is heavy, when you drop
it, there is a risk of injury.
Note: If you drop roll paper, it may roll on the floor and cause injury to the people around.
Note: To prevent roll paper from dropping, store it horizontally on a desk, etc.
Note: Do not use any roll paper that is not specified by the Roll Paper Specifications.
To Next Page
Loading...
