Network Settings
QL-300 User Guide 237
4 Select Network Factory Defaults, and then press the OK button.
5 When Execute appears, press the OK button.
6 Initialization is executed, and the display returns to the standby screen.
Using DHCP
IP addresses can be acquired from a DHCP server.
PC administrator privileges are required for the setup.
Caution: Incorrectly allocating the IP address may cause major malfunctions such as
crashing of the network. Thoroughly consult the network administrator before making the
settings.
To use the device in a DHCP environment, select Auto as the IP address setting method.
Also note that Auto is the IP address setting method under factory default settings, so
performing this procedure is normally not necessary.
1 Press the scroll button â–¼ several times to select Admin Setup, and then press the OK
button.
2 Use the numeric keypad to input the administrator password.
To Next Page
Loading...
Need help?
General
