QuickLabel Systems QL-300 - Page 164

Print Function Settings
QL-300 User Guide 164
FTP Enable
Disable
Enables/disables access
using FTP.
Appears when Enable is
set on the control panel for
TCP/IP.
IPSec Enable
Disable
Enables/disables access
using IPsec.
Appears when Enable is
set on the control panel for
TCP/IP.
SNMP Enable
Disable
Enables/disables access
using SNMP.
Appears when Enable is
set on the control panel for
TCP/IP.
Network Scale Normal
Small
Normal: Printer operates
effectively even if con-
nected to a hub with span-
ning tree functions.
However, printer startup
time becomes longer when
two or three computers are
connected to a small-scale
LAN.
Small: Covers small scale
LANs with 2 or 3 PCs to
large scale LANs are cov-
ered, but if connected to a
hub with spanning tree
functions, operations may
not be effective.
Gigabit Network Enable
Disable
Sets whether to support a
Gigabit network.
Hub Link Setting Auto Negotiate
100Base-TX Full
100Base-TX Half
10Base-T Full
10Base-T Half
Sets the connection mode
to the hub.
Item Value Description