Adjusting the Color
QL-300 User Guide 218
2 Press 3, 1, 0 (function numbers) and press the OK button.
For other colors, use the operations below.
• To tune magenta, press the Fn key, and then press the following buttons: 3, 1, 1, OK.
• To tune yellow, press the Fn key, and then press the following buttons: 3, 1, 2, OK.
• To tune black, press the Fn key, and then press the following buttons: 3, 1, 3, OK.
• To tune white, press the Fn key, and then press the following buttons: 3, 1, 4, OK. This
option is only available on the QL-300s.
3 Press the scroll button ▲ or ▼ to specify a value that is larger than the current value, and
then press the OK button.
Confirm there is a check mark to the left of the selected value.
Select +1 to +3 to make density darker, or -1 to -3 to make it lighter.
4 Press the ON LINE button to return to the standby screen.
To Next Page
Loading...
