QuickLabel Systems QL-300 User Manual

Cleaning
QL-300 User Guide 393
Prepare the following things to clean the cutter’s blades.
• Cleaning swab
• Wiping solvent (alcohol-based solvent)
• Flathead screwdriver
•Tweezers
• Soft cloth
The cleaning swabs and wiping solvent should be the recommended products. Contact
Technical Support to purchase the recommended products.
1 Press and hold the POWER button for approximately 1 second to switch off the power
supply.
Wait a moment, and the LED lamp on the POWER button will turn OFF.
2 Remove the power cord from the printer.
3 Remove the paper that is loaded in the unwinder.

QuickLabel Systems QL-300 Specifications

General

Brand	QuickLabel Systems
Model	QL-300
Category	Label Maker
Language	English