Web Utility
QL-300 User Guide 449
3 Click SNMP > Settings.
4 Select the check box of the SNMP version to be used in STEP1, and then click To STEP2.
If SNMPv3 is selected, you will not be able to view or configure settings with SNMPv1. If
SNMPv3+v1 is selected, you will be able to view settings with either SNMPv1 or SNMPv3,
but you can configure settings using SNMPv3 only.
5 In STEP2, enter an SNMPv3 user name for User Name.
To Next Page
Loading...
