Specifications
QL-300 User Guide 469
*1: QL-300s only.
*2: Not including correction operations.
*3: Equipment service life varies depending on your operating environment.
Print accuracy ±0.5 mm accuracy at leading edge print start point
(2σ N ≥20 When using recommended media and
recommended operating conditions)
±0.5 mm accuracy at right edge print start point
(When using recommended media and recom-
mended operating conditions)
Image stretching: Less than 0.5% of length of
paper (When using recommended media and rec-
ommended operating conditions)
Warmup time Approx. (within) 50 seconds after turning power on
(at room temperature of 25 °C and rated voltage)*
2
Wear items and maintenance parts Wear items: Print cartridge, belt unit (3-piece set of
belt, waste toner box, and 2nd transfer roller),
waste toner box, fuser and exit unit
Maintenance products: Cutter unit, F0 roller unit,
paper guide, feed unit
Service life of equipment*
3
5 years or 500 km
Storage environment Temperature: -10 to 43 °C
Relative humidity: 10 to 90%
Item Specification
To Next Page
Loading...
