QuickLabel Systems QL-300 User Manual

Specifications
QL-300 User Guide 481
Other W1: Liner width 29.4 to 130 mm (1.1575 to 5.12 inches)
W2: Label width 25.4 to 126 mm (1 to 4.9606 inches)
W5: Left liner area (dry
edge)
2 to 25.4 mm (0.0787 to 1 inch)
W6: Right liner area
(dry edge)
2 to 25.4 mm (0.0787 to 1 inch)
L2: Paper length 12.7 to 1320.8 mm (0.5 to 52 inches)
L4: Cut size when in cut
mode
101.6 mm (4 inches) or more
However, if the length of one label is less than 101.6 mm
(4 inches), then the shortest length is 101.6 mm (4 inches)
as multiple sheets are cut
L5: Upper edge cutting
margin
2.12 mm (0.0835 inches)
L6: Lower edge cutting
margin
2.12 mm (0.0835 inches) or more
A: Top margin 2.12 mm (0.0835 inches) or more
B: Bottom margin 2.12 mm (0.0835 inches) or more
C: Left margin 2.12 mm (0.0835 inches) or more
D: Right margin 2.12 mm (0.0835 inches) or more
Item Specification

QuickLabel Systems QL-300 Specifications

General

Brand	QuickLabel Systems
Model	QL-300
Category	Label Maker
Language	English