Control Panel
QL-300 User Guide 72
2 Press the scroll button â–¼ several times to select Admin Setup, and then press the OK
button.
3 Use the numeric keypad to input the administrator password.
The factory default password is 999999. Press the OK button after inputting each
character.
4 Press the OK button.
5 Press the scroll button â–¼ several times to select Panel Setup, and then press the OK
button.
6 Press the scroll button â–¼ several times to select Idle Display, and then press the OK
button.
7 To show the Supplies Life display, select Supplies Life, and then press the OK button.
To Next Page
Loading...
Need help?
General
