EasyManuals Logo

RADIOMETER ABL90 FLEX User Manual

RADIOMETER ABL90 FLEX
346 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #102 background imageLoading...
Page #102 background image
1. Setup ABL90 FLEX reference manual
1-82
Interfacing facilities
A mouse connected to the analyzer may be used to activate all the analyzer's
screen functions instead of the operator touching the screen.
A standard PS/2 port mouse or a USB mouse is the sole item that is required for
connection to the analyzer.
Connecting a mouse:
Step Action
1.
For a standard PS/2 port mouse only: Switch off the analyzer.
2. Connect the mouse to the mouse port at the rear of the analyzer.
3. For a standard PS/2 port mouse only: Switch on the analyzer. After
restart the mouse is ready for use.
A USB mouse can be used right after it has been connected.
An external alphanumeric keyboard may be used to enter data instead of the
on-screen keyboard. However, to select individual buttons on the analyzer
screen, you must use a mouse or must touch the screen.
An IBM enhanced personal computer keyboard or a USB keyboard is the sole
item that is required for connection to the analyzer. The keyboard layout must
correspond to the language version used by the analyzer.
Connecting a keyboard:
Step Action
1.
For an IBM enhanced personal computer keyboard only: Shut down
the analyzer.
2. Connect the keyboard to the keyboard port at the rear of the
analyzer.
3. For an IBM enhanced personal computer keyboard only: Turn on the
analyzer. After restart the keyboard is ready for use.
A USB keyboard can be used right after it has been connected.
Many hospitals are equipped with a computer-controlled information system
such as the Hospital Information System (HIS) or the Laboratory Information
System (LIS). Connecting the analyzer to such an information system via a
network enables the user to exercise greater control over the amount of patient
data circulating within the hospital.
The types of information that can be communicated via a network between the
central computer controlling the information system and the analyzer are:
 Patient results
 Quality control results
 Calibration data
 System messages
Connecting a
mouse
Connecting an
alpha-numeric
keyboard
Connecting to a
network

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RADIOMETER ABL90 FLEX and is the answer not in the manual?

RADIOMETER ABL90 FLEX Specifications

General IconGeneral
BrandRADIOMETER
ModelABL90 FLEX
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals