RADIOMETER ABL90 FLEX User Manual

8. Parameters ABL90 FLEX reference manual
8-44
Default values
The following default values are used in the analyzer, if other values are not
keyed in.
T = 37.0 °C
FO
2
(I) = 0.21 (21.0 %)
RQ = 0.86
ctHb = 9.3087 mmol/L, (15.00 g/dL or 150 g/L)
FCOHb = 0.004 (0.4 %)
FMetHb = 0.004 (0.4 %)
p50(st) = 3.578 kPa (26.84 mmHg)
In addition to the above default values, the analyzer uses the following default:
Ambient temperature = 25.0 C.
Values

RADIOMETER ABL90 FLEX Specifications

General

Type	Blood Gas Analyzer
Analysis Time	35 seconds
Parameters Measured	pH, pCO2, pO2
Sample Volume	65 μL
Connectivity	Ethernet, USB
Calibration	Automatic
Data Management	Integrated data management system
Sample Type	Whole blood, plasma, serum
Power Requirements	100-240 V AC, 50-60 Hz, 150VA
Operating Temperature	15-32 °C (59-90 °F)
Operating Humidity	20-85% relative humidity, non-condensing