RADIOMETER ABL90 FLEX User Manual

ABL90 FLEX reference manual 1. Setup
1-69
A message, sent from the RADIANCE system to the connected analyzer and
displayed on the main screen, can be changed or deleted in this program.
Step Action
1. Press the Keyboard button, type the message (up to 40 characters
long) and confirm with Enter.
To delete the current message, press Delete on the keyboard, or
delete a message and type a new one, if desired.
2. Confirm the change with Enter to return to the Miscellaneous
setup screen.
Step Action
1. Check that the “Enable screen saver” check button is activated in
the “Setup” box.
2. In the “Screen saver” box, select the time with the arrow buttons.
Analyzer
messages
Setting the
time for the
screen saver to
appear

RADIOMETER ABL90 FLEX Specifications

General

Type	Blood Gas Analyzer
Analysis Time	35 seconds
Parameters Measured	pH, pCO2, pO2
Sample Volume	65 μL
Connectivity	Ethernet, USB
Calibration	Automatic
Data Management	Integrated data management system
Sample Type	Whole blood, plasma, serum
Power Requirements	100-240 V AC, 50-60 Hz, 150VA
Operating Temperature	15-32 °C (59-90 °F)
Operating Humidity	20-85% relative humidity, non-condensing