2. Disk functions setup programs ABL90 FLEX reference manual
2-10
Loading/restoring setup
You can reinstall a saved setup quickly and easily without performing the Setup
programs. If desired, only part of the setup can be loaded, e.g. operators.
Step Action
1. Press Select all to include all items from the list on the screen. Or
press Deselect all to exclude all items from the list.
2. To select single items, highlight the desired item, using the
up/down arrows.
Press the check button (
) to include an item.
3. To open or close a group of items, highlight the group title (e.g.
General) and press the
button.
4. Press the Change source button to select the source.
Removable disk: Connect it to the USB port.
5. Select the required source by touching and highlighting it on the
screen.
6. Press Expand/Collapse to access the required folder. The chosen
source appears in the "Choose a directory" box.
7. Press Back to return to the Load setup screen.
8. Press Continue. The analyzer will shut down and then restart with
reloaded setup configuration.
Pressing Cancel will terminate loading the setup.
NOTICE: Contents of Setup settings – see Setup default settings, chapter 1 in
this manual.
Purpose
To Next Page
Loading...
Need help?
General
