RADIOMETER ABL90 FLEX User Manual

2. Disk functions setup programs ABL90 FLEX reference manual
2-6
Restoring all data
You can restore all data in case of loss or damage, provided the backup of all
your data is available.
Step Action
1. Press Change source to choose the source drive/directory.
2. Highlight the drive or folder by touching it on the screen. Press
Expand/Collapse to open a folder in a directory or within a folder.
When completed, the correct destination appears in the upper part
of the box.
If a removable drive is used, connect it to the USB port.
Press Back to return to the previous screen.
3. On the Restore all data screen press Start to continue.
(Or press Close to cancel and return to the main screen.)
4. The restore process begins.
 Network: Restoring does not require any further action
 Removable drive: Press Start
5. Complete restoring all data.
When restoring is complete, the analyzer shuts down and restarts
automatically, configured to the information obtained from the
backup file.
Purpose

RADIOMETER ABL90 FLEX Specifications

General

Brand	RADIOMETER
Model	ABL90 FLEX
Category	Measuring Instruments
Language	English