RADIOMETER ABL90 FLEX User Manual

ABL90 FLEX reference manual 1. Setup
1-63
Printers
Press Menu > Utilities > Setup > General setup > Printers and activate a
button to enter the program.
The following programs are available:
 Printer setup
 Automatic printing
Printer setup
In this program you can set up other printers than the analyzer's printer for
making printouts.
Step Action
1. Highlight a printer from the list, using the up/down arrows.
2. Press Select/Deselect to select the highlighted printer for printing.
You can install any number of printers, but only up to 10 printers
can be selected at a time.
3. Activate the check button in the "Manual printing" box to display the
list of printers every time the Print button has been pressed.
If not activated, all selected printers will make a printout every time
the Print button is pressed.
4. Press Edit to display the keyboard to change the highlighted
printer's name, Type a name and confirm with Enter.
5. To install a new printer, press Install printer.
The Add Printer Wizard program appears. This function can be used
by a Radiometer service representative or a person with network
knowledge. To get the desired printer installed the analyzer will run
a restart.
Program

RADIOMETER ABL90 FLEX Specifications

General

Brand	RADIOMETER
Model	ABL90 FLEX
Category	Measuring Instruments
Language	English