RADIOMETER ABL90 FLEX User Manual

2. Disk functions setup programs ABL90 FLEX reference manual
2-8
Importing/exporting archives
This function allows you to do the following:
 Export (or delete) archived data logs stored onto any drive
 Import externally archived data logs into the analyzer's archive directory from
any location
Step Action
1. Select the desired archive type by activating one of the four
archive-type buttons.
2. Highlight the desired archive with the up/down arrows.
To export the highlighted archive, select the location by pressing
the Disk drive button.
3.
Touch and highlight the desired location on the
Source/Destination screen.
Press Expand/Collapse to open a folder in a directory or within a
folder.
When completed, the correct destination appears in the upper part
of the box.
4. Press Back to return to the Import/Export archives screen.
5. On the Import/Export archives screen press Export.
Press Refresh to update the contents of a drive or directory.
To import an archive, follow the procedure for exporting an archive, using the
right-hand section of the screen and Import.
To delete an archive from a directory, highlight the desired archive and press
Delete.
Purpose
Exporting an
archive
Importing an
archive
Deleting an
archive

RADIOMETER ABL90 FLEX Specifications

General

Type	Blood Gas Analyzer
Analysis Time	35 seconds
Parameters Measured	pH, pCO2, pO2
Sample Volume	65 μL
Connectivity	Ethernet, USB
Calibration	Automatic
Data Management	Integrated data management system
Sample Type	Whole blood, plasma, serum
Power Requirements	100-240 V AC, 50-60 Hz, 150VA
Operating Temperature	15-32 °C (59-90 °F)
Operating Humidity	20-85% relative humidity, non-condensing