1. Setup ABL90 FLEX reference manual
1-16
Patient report setup
In this program you can create a number of new layouts for patient reports or
modify the existing ones.
Press Menu > Utilities > Setup > Analysis setup > Patient reports to
access the program.
Step Action
1. Press New to make a new layout (marked "New") or Copy to make
a copy of a highlighted layout.
2. Press the Keyboard button next to the "Name" box, type in a new
name for your layout and confirm with Enter to return to the
Patient report setup screen.
3. Enforce, if desired, the Radiometer default settings on the
highlighted layout by pressing -R- default. This will give you a
starting point for designing your own layout.
4. Edit your layout as described in Editing a layout further in this
section.
5. If desired, make the highlighted layout a default for your analyzer
by pressing Make default. It will be marked with () in the list of
layouts.
6. Make a test printout, if desired, of the highlighted layout (patient ID
items and selected parameter groups with the parameters/units for
each parameter group) by pressing Preview. This test print will be
labeled "Preview".
7. To delete a highlighted layout, press Delete.
Note that the Radiometer default layout cannot be deleted. The
button is disabled if only the Radiometer default layout is available.
Program
Creating a
layout
To Next Page
Loading...
Need help?
General
