ABL90 FLEX reference manual 1. Setup
1-49
Acoustic signal setup
In this program you can set up a short beep to sound after certain events.
Step Action
1. Activate the desired check button(s).
2. Select volume for the acoustic signal or activate the "Mute all
acoustic signals" check button.
Available event Explanation
Value exceeds critical
range
One of the measured values exceeds the specified
critical limits for that parameter.
Close inlet The inlet should be closed.
Result is ready A sample has been analyzed and the results are ready
for viewing.
Inlet is open too long
The inlet should be closed.
To Next Page
Loading...
