RADIOMETER ABL90 FLEX User Manual

1. Setup ABL90 FLEX reference manual
1-46
User-defined notes
Press Utilities > Setup > General setup > Parameters and input > User-
defined notes.
Adding a Note:
Step Action
1. Activate one of the check buttons on the screen.
2. Press Add.
3. Type the text for the Note, using the screen keyboard. Confirm with
Enter to save the text and return to the previous screen.
Editing a Note:
Step Action
1. Highlight a Note in the "Notes" box, using the up/down arrows, and
press Edit.
2. Edit the text and confirm with Enter.
Deleting a Note:
Step Action
1. Highlight a Note in the "Notes" box.
2. Press Delete.
NOTICE: A list of Notes made for a given option will be marked with a pencil
icon on the relevant screen(s).

RADIOMETER ABL90 FLEX Specifications

General

Type	Blood Gas Analyzer
Analysis Time	35 seconds
Parameters Measured	pH, pCO2, pO2
Sample Volume	65 μL
Connectivity	Ethernet, USB
Calibration	Automatic
Data Management	Integrated data management system
Sample Type	Whole blood, plasma, serum
Power Requirements	100-240 V AC, 50-60 Hz, 150VA
Operating Temperature	15-32 °C (59-90 °F)
Operating Humidity	20-85% relative humidity, non-condensing