RADIOMETER ABL90 FLEX User Manual

1. Setup ABL90 FLEX reference manual
1-52
Communications setup
Press Menu > Utilities > Setup > General setup > Communications and
activate a button to enter a program.
The following programs are available:
 RADIANCE connection
 LIS/HIS connection
 Automatic data transmission
 Automatic data request
 Patient lookup setup
 QA Portal connection
See Rear in section Hardware, chapter 2 in the ABL90 FLEX operator's manual
for the identification and location of the serial RS-232 interface connection
(COM) and the network (TCP/IP) RJ45 Ethernet connection.
RADIANCE connection setup
In this program you can connect the analyzer to the RADIANCE system.
NOTICE: Connecting the analyzer to the RADIANCE system should be
performed by the RADIANCE administrator of your institution.
Step Action
1. Touch and highlight the "Server address" box. Type in the TCP/IP
address of your RADIANCE PC, using the screen keypad or
keyboard.
2. Touch and highlight the "Port" box. Type in the port number, using
the keyboard.
3. Touch and highlight the "Password" box. Type in your RADIANCE
password, using the keyboard.
Program

RADIOMETER ABL90 FLEX Specifications

General

Brand	RADIOMETER
Model	ABL90 FLEX
Category	Measuring Instruments
Language	English