ABL90 FLEX reference manual 1. Setup
1-7
To edit the operator identifications of an operator, do the following:
Step Action
1. Press the Edit Operator button to display the Add New Operator
screen.
2. Touch and highlight the box to be changed. Enter the change. If you
change the passwords, confirm them again.
The password must be at least four characters long. The logon
barcode and the password can be identical.
3. Press Back.
If the password is not accepted, the Add New Operator screen
remains open and a message, telling you what was wrong, appears.
If the password is accepted, the Operators and Passwords screen
is displayed.
4. In the Operators and Passwords screen, select the desired access
profile of the new operator.
To remove an operator from the list, use the up/down arrow buttons in the
"Operator" box to highlight the operator and press Remove Operator.
NOTICE: If the Centralized User Management option is enabled in the General
Security screen you cannot add, remove or edit the operators, but only view the
access profiles of the individual operators.
To Next Page
Loading...
Need help?
General
