Message Problem and solutions
client EAP method rejected The authentication mode of the access point is
different with the authentication mode of the
supplicant.
Use the same authentication mode between the
access point and the supplicant.
Client password rejected The client's password was rejected. Check the client
password.
Client TLS certificate rejected The client's TLS certificate was rejected. Check the
certificate.
connected DHCPv6 server <IPv6 address> The IP address was successfully received from the
DHCPv6 server.
connecting The supplicant is waiting for wireless connection to
the access point.
Could not attach to FileServer <error number> Connection to the file server could not be
established when the remote printer was online.
The file server refused the connection. Check the
file server's configuration.
Could not attach to PServer <print server> Connection to the print server could not be
established when the remote printer was online.
The print server refused the connection. Check the
print server's configuration.
connection from A user logged in from the host <IP address>.
Current Interface Speed: xxxMbps Speed of the network (10Mbps, 100 Mbps, or
1Gbps).
Current IPX address <IPX address> The current IP address is <IPX address>.
DHCPv6 server not found. The DHCPv6 server was not found. Make sure that
the DHCPv6 is on the network.
dpsd is disabled. Communication via PictBridge is unavailable
because PictBridge is disabled in the security mode.
Enable PictBridge in the security mode.
Message List
231
To Next Page
Loading...
Need help?
General
