1. Remove the SD-card slot cover [A] for SD cards ( x 1).
2. Turn the SD-card label face [B] to the rear of the machine. Then push it slowly into slot 1 until you hear
a click.
3. Attach the SD-card slot cover [A] ( x 1).
4. Make sure that the machine can recognize the option (see ‘Check All Connections’ at the end of this
section).
VM Card Type I
The VM card application cannot be moved to another SD card. However, other applications can be moved
onto the VM card.
Installation Procedure
1. Switch the machine off.
2. Installation
144
To Next Page
Loading...
Need help?
General
