2. Turn the SD-card label face [B] to the rear of the machine. Then push it slowly into slot 1 until you hear
a click.
• Only one SD card slot is available for applications provided on SD cards.
• If the customer wants to use two or more applications from SD cards, the applications must be
moved to a single SD card.
• The PostScript3 application and fonts cannot be moved to another SD card. However, other
applications can be moved onto the PostScript3 SD card.
3. Attach the slot cover [A] ( x 1).
4. Attach the “Adobe PostScript 3” decal [A] to the front door.
5. Make sure that the machine can recognize the option (see ‘Check All Connections’ at the end of this
section).
File Format Converter
• Unplug the main machine power cord before you do the following procedure.
2. Installation
128
To Next Page
Loading...
Need help?
General
