Ricoh MPC 2800 AT-C2 User Manual

You can only install one of the following network interfaces at a time: (IEEE 802.11 a/g, g (Wireless LAN),
IEEE1284, Bluetooth).
1. Remove the slot cover [A] ( x 2).
2. Install the interface board [B] (Knob-screw x 2) into the slot A.
3. Make sure that the machine can recognize the option (see ‘Check All Connections’ at the end of this
section).
IEEE 802.11 a/g, g (Wireless LAN)
Installation Procedure
• Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces at one time: (IEEE 802.11 a/g, g (Wireless
LAN), IEEE1284, Bluetooth).
2. Installation
130
2

Ricoh MPC 2800 AT-C2 Specifications

General

Brand	Ricoh
Model	MPC 2800 AT-C2
Category	All in One Printer
Language	English